Bitumen Supplier & Exporter: Golden Energy FZ
Golden Energy FZ is a trusted supplier and exporter of high-quality bitumen products serving road construction companies, infrastructure contractors, trading firms, and industrial customers worldwide.
As a key material in modern infrastructure development, bitumen plays a vital role in road construction, waterproofing systems, industrial coatings, and civil engineering projects. Golden Energy FZ provides reliable access to a wide range of bitumen grades sourced from reputable producers and supplied according to international quality standards.
Our commitment to product quality, competitive pricing, and dependable logistics enables us to support customers across the Middle East, Africa, Asia, and international markets.
Bitumen 85/100
| Characteristics | Unit | Specification | Test Method |
|---|---|---|---|
| Penetration @ 25 °C | 0.1 mm | 85–100 | ASTM D-5 |
| Specific gravity @ 25 °C | gr/cm³ | 1.01–1.05 | ASTM D-70 |
| Softening Point | °C | 42–52 | ASTM D-36 |
| Ductility @ 25 °C | Cm | 100 Min | ASTM D-113 |
| Loss on heating | % wt | 0.5 Max | ASTM D-6 |
| Drop in penetration after heating | % | 20 Max | ASTM D-6 & D-5 |
| Flash Point | °C | 232 Min | ASTM D-92 |
| Solubility in CS₂ | % wt | 99.0 Min | ASTM D-4 |
| Organic matter insoluble in CS₂ | % wt | 0.2 Max | ASTM D-4 |
| Viscosity @ 60 °C | p | 1000 ± 200 | ASTM D-2171 |
| Spot test | – | Negative | *A.A.S.H.O.T.102 |
Different bitumen penetration Grades
| Characteristics | Unit | 30/40 | 50/70 | 100/120 | 160/220 | 200/300 | Test Method |
|---|---|---|---|---|---|---|---|
| Specific gravity @25 °C | gr/cm³ | 1.01‑1.06 | 1.01‑1.06 | 1.01‑1.04 | 1.01‑1.06 | 1.01 ± 0.05 | ASTM D‑70 |
| Penetration @ 25 °C | 0.1 mm | 30‑40 | 50‑70 | 100‑120 | 160‑220 | 200‑300 | ASTM D‑5 |
| Softening Point (R & B) | °C | 55‑63 | 46‑54 | 42‑49 | 35‑43 | 34‑41 | ASTM D‑36 |
| Ductility @ 25 °C | cm | 100 | 100 | 100 | 100 | 100 | ASTM D‑113 |
| Loss on heating, Max | % wt | 0.2 | 0.2 | 0.2 | 0.2 | 1.3 | ASTM D‑6 |
| Drop in Penetration after heating, Max | % | 20 | 20 | 20 | 20 | – | ASTM D‑6 & D‑5 |
| Flash Point, Min | °C | 250 | 230 | 250 | 220 | 177 | ASTM D‑92 |
| Solubility in CS2 | % wt | 99.5 | 99 | 99.5 | 99 | 99 | ASTM D‑4 |
| Spot test | – | Negative | Negative | Negative | Negative | Negative | A.A.S.H.O.T.102 |
Oxidized bitumen
| Characteristics | Unit | 85/25 | 95/25 | 90/15 | 115/15 | Test Method |
|---|---|---|---|---|---|---|
| Penetration @ 25 °C, 100 gm, 5 seconds | 0.1 mm | 20/30 | 20/30 | 20–Oct | 20–Oct | ASTM D‑5 |
| Specific gravity @25 °C | gr/cm³ | 1.01‑1.05 | 1.01‑1.05 | 1.01‑1.05 | 1.01‑1.05 | ASTM D‑70 |
| Softening Point (R & B) | °C | 80/90 | 90/100 | 85/95 | 110/120 | ASTM D‑36 |
| Loss on heating, Max | % wt | 0.2 | 0.2 | 0.2 Max | 0.2 | ASTM D‑6 |
| Flash Point Cleveland Open Cup, Min | °C | 260 | 260 | 225 | 260 | ASTM D‑92 |
Performance Grades Bitumen (PG)
| High Temperature Performance | Low Temperature Performance |
|---|---|
| PG 46 | -46, -40, -34 |
| PG 52 | -46, -40, -34, -28, -22, -16, -10 |
| PG 58 | -40, -34, -28, -22, -16, -10 |
| PG 64 | -40, -34, -28, -22, -16, -10 |
| PG 70 | -40, -34, -28, -22, -16, -10 |
| PG 76 | -34, -28, -22, -16, -10 |
| PG 82 | -34, -28, -22, -16, -10 |
Viscosity Grades Bitumen (VG)
| Characteristics | Unit | VG 40 | VG 30 | VG 20 | VG 10 | Test Method |
|---|---|---|---|---|---|---|
| Absolute Viscosity @ 60 °C, Poises | °C | Min.3200 | Min.2400 | Min.1600 | Min.800 | IS 1206 (Part 2) |
| Kinematic Viscosity @ 135 °C | cSt | Min.400 | Min.350 | Min.300 | Min.250 | IS 1206 (Part 3) |
| Softening Point (R&B) | °C | Min.50 | Min.47 | Min.45 | Min.40 | IS 1205 |
| Flash Point (Cleveland Open Cup) | °C | Min.220 | Min.220 | Min.220 | Min.220 | IS 1209 |
| Solubility in trichloroethylene | % | Min.99 | Min.99 | Min.99 | Min.99 | IS 1206 |
| Penetration @ 25 °C (100 grams, 5 seconds) | 0.1 mm | 40‑60 | 50‑70 | 60‑80 | 80‑100 | IS 1203 |
| Test on residue from thin film oven tests/RTFOT | – | – | – | – | – | – |
| i) Viscosity ratio @ 60 °C | °C | Max.4.0 | Max.4.0 | Max.4.0 | Max.4.0 | IS 1206 (Part 2) |
| ii) Ductility @ 25 °C (Thin film oven test) | cm | Min.25 | Min.40 | Min.50 | Min.75 | IS 1208 |
| Specification Gravity @ 27/27 | °C | Min.0.99 | Min.0.99 | Min.0.99 | Min.0.99 | IS 1202 |
Conforms to BIS (IS 73:2006) Specifications
Petro sepider sadr Cut back Bitumen Grades Slow Curing (SC)
| Characteristics | Unit | SC70 | SC250 | SC800 | SC3000 | Test Method | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| Min | Max | Min | Max | Min | Max | Min | Max | |||
| Kinematic Viscosity @ 60 °C | CST | 70 | 140 | 250 | 500 | 800 | – | 160 | 3000 | ASTM D-2170 |
| Flash Point | °C | 66 | – | 79 | – | 93 | – | 107 | – | ASTM D-92 |
| Penetration @ 25 °C, 100 gm, 5 Second | CM | 40 | – | 60 | – | 70 | – | 80 | – | ASTM D-5 |
| Distillate, volume percent of total distillate to 360 °C | °C | 10 | 30 | 4 | 20 | 2 | 12 | 5 | ASTM D-402 | |
| Ductility @ 25°C, Min | CM | 100 | – | 100 | – | 100 | – | 100 | – | ASTM D-113 |
| Solubility in Trichloroethylene, Min | % | 99 | – | 99 | – | 99 | – | 99 | – | ASTM D-2042 |
| Water, Max | %VOL | – | 0.5 | – | 0.5 | – | 0.5 | – | 0.5 | ASTM D-95 |
Cut back Bitumen Grades Medium Curing (MC)
| Characteristics | Unit | Test Method | |||||||||||
| MC30 | MC70 | MC250 | MC800 | MC3000 | |||||||||
| Min | Max | Min | Max | Min | Max | Min | Max | Min | Max | ||||
| Kinematic Viscosity @ 60 °C | CST | 30 | 60 | 70 | 140 | 250 | 500 | 800 | 1600 | 3000 | 6000 | ASTM D-2170 | |
| Flash Point, Min | °C | 38 | – | 38 | – | 66 | – | 66 | – | 66 | – | ASTM D-92 | |
| Penetration @ 25 °C, 100 gm, 5 Second | CM | 120 | 250 | 120 | 250 | 120 | 250 | 120 | 250 | 120 | 250 | ASTM D-5 | |
| Distillate test: Distillate, volume percent of total distillate to 360 °C | ASTM D-402 | ||||||||||||
| To 225 °C | °C | – | 35 | – | 25 | – | 20 | – | – | – | – | ||
| To 260 °C | °C | 30 | 75 | 10 | 70 | 5 | 55 | – | 40 | – | 15 | ||
| To 316 °C | °C | 75 | 95 | 65 | 93 | 60 | 90 | 45 | 85 | 15 | 75 | ||
| Residue from distillation to 360 °C, Min | %VOL | 50 | – | 55 | – | 67 | – | 75 | – | 80 | – | ASTM D-402 | |
| Ductility @ 25°C, Min | CM | 100 | – | 100 | – | 100 | – | 100 | – | 100 | – | ASTM D-113 | |
| Solubility in Trichloroethylene, Min | % | 99 | – | 99 | – | 99 | – | 99 | – | 99 | – | ASTM D-4 | |
| Water, Max | %VOL | – | 0.2 | – | 0.2 | – | 0.2 | – | 0.2 | – | 0.2 | ASTM D-95 |
Cut back Bitumen Grades Rapid Curing (RC)
| Characteristics | Unit | Specification | Test Method | ||||||||||
| RC 30 | RC70 | RC250 | RC800 | RC3000 | |||||||||
| min | Max | Min | Max | Min | Max | Min | Max | Min | Max | ||||
| Kinematic Viscosity @ 60 °C | CST | 30 | 60 | 70 | 140 | 250 | 500 | 800 | 1600 | 3000 | 6000 | ASTM D-2170 | |
| Flash Point, | °C | – | – | – | 27 | – | 27 | – | 27 | – | ASTM D-92 | ||
| Penetration @ 25 °C, 100 gm, 5 Second | CM | 80 | 120 | 80 | 120 | 80 | 120 | 80 | 120 | 80 | 120 | ASTM D-5 | |
| Residue from distillation to 360 °C, Min | |||||||||||||
| To 225 °C | °C | 55 | – | 50 | – | 35 | – | 15 | – | – | – | ||
| To 260 °C | °C | 75 | – | 70 | – | 60 | – | 45 | – | 25 | – | ||
| To 316 °C | °C | 90 | – | 85 | – | 80 | – | 75 | – | 70 | – | ||
| Residue from distillation to 360 °C, Min | %VOL | 50 | – | 55 | – | 65 | – | 75 | – | 80 | – | ASTM D-402 | |
| Ductility @ 25°C, Min | CM | 100 | – | 100 | – | 100 | – | 100 | – | 100 | – | ASTM D-113 | |
| Solubility in Trichloroethylene, Min | % | 99 | – | 99 | – | 99 | – | 99 | – | 99 | – | ASTM D-2042 | |
| Water, Max | %VOL | – | 0.2 | – | 0.2 | – | 0.2 | – | 0.2 | – | 0.2 | ASTM D-95 |
Cut back Bitumen Grades Rapid Curing (RC)
| GOLDEN ENERGY Bitumen Emulsion | Specification of Cationic Bitumen Emulsions | |||||||||||||
| Quick setting | Rapid setting | medium setting | slow setting | |||||||||||
| CQS_1h | CRS_1 | CRS_2 | CRS_2 | CRS_2h | CRS_1 | CRS_1h | ||||||||
| main | max | main | max | main | max | main | max | main | max | main | max | main | max | |
| Viscosity, Say bolt Furol @ 25°C SFs | 20 | 100 | – | – | – | – | – | – | – | – | 20 | 100 | 20 | 100 |
| Viscosity, Say bolt Furol @ 25°C SFs | – | – | 20 | 100 | 100 | 400 | 50 | 450 | 50 | 450 | – | – | – | – |
| Storage Stability test, 24-h, % A | – | 1 | – | 1 | – | 1 | – | 1 | – | 1 | – | 1 | – | 1 |
| Demulsibility, 35 mL, 0.8% Dioctyl sodium | – | – | 40 | – | 40 | – | – | – | – | – | – | – | – | – |
| Particle charge test | Positive | Positive | Positive | Positive | – | – | – | – | – | – | – | – | – | – |
| Sieve test, % A | – | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | 0/1 | ||||||
| Cement Mixing test, % | – | N/A | – | – | – | – | – | – | – | 2 | – | 2 | ||
| Coating, ability and water resistance: | ||||||||||||||
| Coating, dry aggregate | – | – | – | – | – | – | good | – | good | – | – | – | – | |
| Coating, after spraying | – | – | – | – | – | – | fair | – | fair | – | – | – | – | |
| Coating, wet aggregate | – | – | – | – | – | – | fair | – | fair | – | – | – | – | |
| Coating, after spraying | – | – | – | – | – | – | fair | – | fair | – | – | – | – | |
| Oil Distillate, by volume of emulsion, % | – | – | – | 3 | 3 | 12 | 12 | – | – | |||||
| Residue % | 57 | – | 60 | – | 65 | – | 65 | – | 65 | – | 57 | – | 57 | – |
| Penetration @ 25°C, 100 g, 5 Sec | 40 | 30 | 100 | 250 | 100 | 250 | 100 | 250 | 40 | 90 | 100 | 250 | 40 | 90 |
| Ductility, 25°C, 5 Cm/Min, Cm | 40 | – | 40 | – | 40 | – | 40 | – | 40 | – | 40 | – | 40 | – |
| Solubility in trichloroethylene, % | 97/5 | – | 97/5 | – | 97/5 | – | 97/5 | – | 97/5 | – | 97/5 | – | 97/5 | – |
Our Bitumen Product Range
We offer a comprehensive portfolio of bitumen products designed to meet diverse project requirements.
Penetration Grade Bitumen
Penetration grade bitumen is widely used in asphalt production and road construction projects. These grades provide excellent adhesion, flexibility, and durability under different climate conditions.
Available grades include:
- Bitumen 40/50
- Bitumen 60/70
- Bitumen 80/100
- Bitumen 85/100
Oxidized Bitumen
Oxidized bitumen is produced through controlled air blowing processes to enhance softening point and temperature resistance.
Applications include:
- Waterproofing membranes
- Roofing systems
- Pipe coatings
- Industrial insulation
- Construction materials
Performance Grade Bitumen
Performance grade bitumen is engineered to meet specific climatic and traffic conditions, providing improved pavement performance and durability.
Industrial Bitumen Solutions
Golden Energy also supplies specialized bitumen products for industrial manufacturing, protective coatings, insulation systems, and infrastructure projects.
Why Choose Golden Energy FZ?
- Reliable global supplier and exporter
- Consistent product quality
- Competitive international pricing
- Flexible packaging options
- Professional logistics support
- Technical documentation available
- Long-term supply capability
- Fast response to customer inquiries
Industries We Serve
Our bitumen products are supplied to customers operating in:
- Road construction
- Highway development
- Airport projects
- Civil engineering
- Waterproofing industries
- Roofing manufacturers
- Industrial coating producers
- Infrastructure development projects
Packaging & Delivery Options
To meet various customer requirements, our bitumen products are available in:
- New Steel Drums
- Jumbo Bags
- Bitubags
- Bitutainers
- Bulk Cargo
Customized packaging solutions can also be arranged based on project specifications.
Global Bitumen Export Services
Golden Energy FZ supports international buyers with complete export solutions including quality assurance, documentation, logistics coordination, and shipment management.
We proudly serve customers across Africa, Asia, the Middle East, and other international markets with reliable supply programs and long-term partnership opportunities.
Request a Quote
Looking for a reliable bitumen supplier and exporter?
Contact Golden Energy FZ today for product specifications, pricing information, packaging options, and export inquiries.
Build by Fuel Trading Experts Who Demands A Standard
